Description
Plasma is one of the four fundamental states of matter, the character of which is high temperature, high conductivity and high activity. This equipment is the first fractional plasma equipment, which is a revolutionary method for perfect facial and body rejuvenation.
Operation principle
In a controllable manner, the needle-shaped plasma column is released into the skin in a fractional manner and point by point. The principle is to ionize the gas in the air to create smaller electrical arcs, the fabrics are treated “sublimated” and prevent the spread of unwanted heat to surrounding areas. The heat increases and is subsequently transferred through the epidermis to the papillary layer that contains fibroblast cells. The result is the contraction and tightening of skin cells, leading to skin remodeling and improvement of various signs of aging, scars, etc.
Please note that this equipment is not in stock and we must order it. It usually takes about 15 days to reach your destination. For more information call our Whatsapp. Thanks!
General Description
Plasma is one of the four fundamental states od matter, whose character has high temperature, high conductivity and high activity. This equipment is the first fractional plasma equipment, which is a revolutionary method for a perfect face and body rejuvenation.
Working Principle
Under a controllable way, the needle-shaped plasma column is released to the skin by the fractional way and dot by dot. The principle is to ionize gas in the air to create more small electrical arches, tissues are treated “sublimate” and avoid spreading unwanted heat to the surrounding areas. The heat widens and is subsequently transferred into the epidermis all the way to the papillary layer which contains fibroblast cells. The result is the contraction and tightening of the skin cells, leading to the skin a remodeling and improvement in various signs of aging, scars, etc.
Equipment characteristics:
A – Two spark modes of invasive way
The purple color tip’s needles just contact the skin, the short plasma arc penetrates deeply into the skin and a local glow will appear. Invasive treatment way by high energy level 6 to 10, for different skin situation one can choose the exact energy level for wrinkles, eyes and scars. The epidermis will completely break down and the energy will be mainly released axially along the breakdown path. Reaching the dermal papilla layer and reticular layer.
Traditional single needle tip focus to accurate treatment for face’s small area, especially eyelid lifting Moles, warts and polyp etc can also be cut fast by this tip.
B – Safe and accurate fractional scan
High power design but more energy level choice, high energy plasma column. Adaptive high-frequency excitation source, the plasma column’s energy remains stable, convenient to adjust and good directivity.
Small dot size and even dots distribution, low risk of skin side effect. Comfortable treatment feeling, no need of anesthesia, high safety and no downtime.
Deep treatment depth, excellent effect.
C More scan mode
Dot, line and fractional array are optional, meet target shape precisely
D Fast and efficient
Dot-by-Dot scanning operation, short treatment time, good consistency to dots ensure excellent effect.
E High integration and smart design. High reliability and stable performance
F Low investment and extremely high return
Technical Advantages
• Compared to fractional RF
Fractional Rf’s energy just reaches epidermis but wrinkles and scar problems are in the dermis. Needles don’t make contact with the skin to operate and they’re not influenced by skin resistance. By using higher voltage, faster discharge the release of the energy is done in a shorter time so lower skin damage.
• Compared to fractional laser
The Plasma platform cost is much more economical but can cover all the laser applications. Safety risk is much lower both to the operator and to the patient, it can be used more widely and there are no medical limitations.
• Compared with normal plasma
Normal plasma’s current excitation is done at a lower frequency and the plasma column has poor directivity and lower power. Single plasma’s treatments needs much longer times, the handle and energy are difficulr to control, un-even treatment depth and dot’s consistency are poor, so more dangerous and bigger damage risk to the skin.
• Compared with micro-needle RF
Micro-needle is a purely invasive treatment, our platform is less dangerous and has lower consumable costs
Conclusion:
Fractional Plasma is the best solution to replace all the fractional beauty technologies as an innovative way of dealing with the skin problems.
Technology explained
What is cold plasma
Cold, or non-thermal plasma is a low temperature plasma with fantastic surface treatment, cleaning and antimicrobial efficacy.
A cold plasma is a plasma that exists in a state of non-equilibrium. In contrast to a hot plasma, the temperature of the electrons is a cold plasma is some two orders of magnitude greater than the temperature of the ions and molecules, whose temperature is roughly ambient. The result is that these plasmas can exist at as low as 30ºC. In fact they are completely safe to touch.
How cold plasma works on the skin
Non-ablative cold plasma treatments are the emerging trend for non-invasive and painless plasma based skin rejuvenation. Aside from reducing the risk of side effects and downtime associated with ablative treatments, non-ablative plasma treatments use controlled plasma- containing energy to targeted skin areas without damaging them. The generated energy, or activated ionized gas is emitted to the dermis skin layer in micro-pulses, triggering the body’s wound-healing response to promote new collagen growth.
Characteristics
Input power: 12V / 3A – use of a transformer at 220V or 110V normal electrical plug
Output power: 10W (avg); 150W (Peak)
Energy: 10 ~ 400mJ/Dot
Pulse width: 0.1 ~ 4ms/Dot
Spark mode: Dot; Line; Array
Dots number: 1, 3, 5, 9, 13, 21, 25
Cold Plasma energy level: 1.5W; 2.5W; 3.5W; 4.5W
Cold plasma width: 75 ms
Cold plasma frequency: 1 ~ 10Hz
Cold Plasma temp: <= 55ºC
Size: 420 * 380 * 285mm
Net Weight: 8,8 kg
Benefits
Benefits of non-ablative cold plasma treatment
- Reduced surface level skin bacteria & harmful microbes
In a past breakthrough experiment, a mere 2 minutes treatment of cold atmospheric plasma was seen to decrease 40% of the bacterial cold on plasma treated wounds, regardless of the species of bacteria.
Skin cleaning, acne skin with inflammation, allergic dermatitis and eczema treatment - Soothes irritated skin and help improve sensitive skin
- Increased absorption of vital skincare ingredients
Plasma technology instantly activates the epidermal cells of the skin with high amounts of energy, which increases the skin’s hydrophilicity.
enhances the absorption of active ingredients - Refines pores and overall texture
Improves skin texture and tone: rough skin, large pores, greasy skin, skin resurfacing - Visible anti-aging results
Active nitrogen and oxygen ions can easily pass through pores and enter the deep layers of the skin catalyzing the regeneration of fibroblasts. This stimulates the production of collagen, elastin and hyaluronic acid, effectively reducing fine lines and wrinkles caused by photodamage and aging. Additionally, plasma technology boosts cell turnover to strenghten skin elasticity and to improve uneven skin tones and pigmentation.
The best thong about non-ablative cold plasma technology is that it benefits every skin type and condition. The innovative treatment can be done safely, comfortably and painlessly without any downtime required.
Plasma Technology Comparison
Please click on the link and download the word document:
Plasma Technology Comparison
+1 (786) 546-8347 (Office)
